Showing posts with label DIY. Show all posts
Showing posts with label DIY. Show all posts

Friday, August 31, 2012

Crafty Friday!

Today's project I actually completed a couple of months ago. It was my first big project and I'm really proud of it. I upcycled an old changing table into a cute dresser.
When my fiance and I moved to VA we had no furniture, so it was my job to furnish the apartment on a budget. There are so many antique/thrift shops in this area so that's where I started my search. I found this changing table for only $65 and it's solid wood! All it needed was some TLC plus some paint and new knobs.






 First, I cleaned with the whole dresser with soap, water, and a wash cloth to remove any debris.

Then I removed the old pulls. I wanted to replace them with knobs so I had to fill the extra hole with wood putty. After that dried I sanded it until it was smooth. Now it's ready to paint.

I decided to do a two tone look with blue and white. I used Valspar satin finish paint from Lowes. It's great because you can get sample sizes (1/2 pint) of paint really cheap.

 I painted the drawers first. It took 2 coats and then a little touch up here and there. The paint dries really fast so it didn't take me very long.
Once the drawers are completely dried you can attach the new knobs. I got these from Lowes as well. They have a really big selection. I used different knobs, but the same style for each drawer. I like when things aren't too matchy-matchy.
Changing out the knobs is the easiest way to update or change the look of your furniture. Pier 1 Imports and Anthropologie also have really great knobs that are vintage inspired.


Next, I painted the frame of the dresser white. It only took two coats! This really surprised me, I was for sure it would take more.
And this is the finished product....for about $85.
(Don't mind the cords! We've since gotten those under control lol.)

I know I didn't use proper furniture painting procedure, but I think it turned out well. So, as long we're happy with it, I don't really think it matters. By the way, it's been about 5 months since I did this project and the paint has held up great!

Friday, June 22, 2012

Crafty Friday

Every Friday I will post a craft project that I've completed and show you step by step how to re-create it.

My first craft is a jewelry holder.

Time needed : 15min

Supplies needed:
Piece of wood (I got mine at Micheal's. They have wood in many different shapes and sizes.)
Burlap
Knobs and pulls (I got mine at Target)
Lace
Drill
Sharpie, pen, or pencil
Staples, glue, or needle & thread
Easel

This project is super easy!
First, decide what your layout is going to be. What's great about making it yourself is that it will be custom for the jewelry you already have. I laid out my necklaces and bracelets on the piece of wood until I found a configuration i liked.
Next, mark the wood where your knobs and/or pulls will go. Then drill the holes.
Now you need to cut the burlap to the size of the wood. Make sure you cut it big enough to wrap around the whole piece, this will make it easier to attach.You can glue, staple, or sew the burlap to the wood. I wish i would've used staples but i didn't have any, so I sewed mine. Luckily, I cut my burlap big enough that the ends all met in the back.
Next, attach your lace. Again, i sewed mine, but I'm sure it's easier to use glue.
After that you're ready to screw on the knobs and pulls. The burlap makes it easy because you don't have to cut holes in the fabric for the screws to fit through.
Last thing to do is add your jewelry!